 CBR250RR with aftermarket paint job shown above | |
| Manufacturer | Honda |
|---|---|
| Production | 1986-1996 |
| Engine | 250 cc (15 cu in) 4-stroke, inline 4 |
| Top speed | 180–200 km/h (110–120 mph)[citation needed] |
| Power | 40–45 PS (29–33 kW)[1] |
| Torque | 23.5 newton metres (17.3 ft·lbf) @ 11,500 rpm |
| Weight | approx 142 kg (310 lb)[2] (dry) approx 157 kg (350 lb)[2] (wet) |
Initially these bikes were only sold new in Japan, and later the CBR250RR was sold new in Australia. But they can be found in almost any country of the world. In countries which have a 250 cc learner capacity limit, the CBR250RR is one of the most powerful 4-stroke bikes a learner is allowed to ride.[citation needed] The CBR250RR has six gears, and revs just under 9,000 rpm at 100 km/h (62 mph). The engine uses gear driven cams.
The suspension on the bike was basic with non-adjustable front forks and a rear monoshock with adjustment for preload only.
The CBR250RR(R) is known as the 'tri-colour' due to the fact that most (but not all) of the official bikes came in that particular colour scheme. Other than the engine restrictions, this model had several additional differences to its predecessors (L & N models). The bike featured more powerful low-beam headlights coupled to a new relay which was automatically deactivated by the start/crank button on the handlebar. This changed the pinout of the switchgear and kill-switch. The carburettor rubber boots were smaller on the CBR250RR(R) than the imports.
Tidak ada komentar:
Posting Komentar